Installation & Assembly

Pan Head Screw

Periscope

3/4” L Phillips

rings.

Periscope

(15”H x 4-1/4”W x 4-1/4” D)

(2-3/16”H x 1-1/2” W)

Bracket

Bracket is snapped

in between these two

View Finder

has a notch

for your nose here.

1/2" OR THICKER.

FLAT SURFACE

2-1/4" OR TALLER

Periscope (07-0002)

1: Fasten the Periscope Bracket to the board with the 3/4” long phillips pan head screws

provided.

2: Snap the Periscope into the Periscope Bracket. The Periscope Bracket should be in

between the “rings” at the bottom of the Periscope.

Please note: Periscope does not magnify objects.

Periscope does contain mirrors inside and does function like a real periscope.

!WARNING! **DO NOT LOOK INTO SUN OR OTHER BRIGHT LIGHTS WITH PERISCOPE**

*FOR RESIDENTIAL USE ONLY*

PAGE 1
Periscope (07-0002) 1: Fasten the Periscope Bracket to the board with the 3/4” long phillips pan head screws provided. 2: Snap the Periscope into the Periscope Bracket. The Periscope Bracket should be in between the “rings” at the bottom of the Periscope. Periscope (15”H x 4-1/4”W x 4-1/4” D) 3/4” L Phillips Pan Head Screw Bracket is snapped in between these two rings. FLAT SURFACE 2-1/4" OR TALLER 1/2" OR THICKER. Periscope Bracket (2-3/16”H x 1-1/2” W) View Finder has a notch for your nose here.