Installation & Assembly

Step 30: Swing Beam to Swing Legs
1: Fasten the Swing Beam to the Swing Leg Bracket using 3/8” x 6-1/2” carriage bolts
with torque washers on top of the Swing Beam, and 3/8” lock nuts with 3/8” washers
underneath.
2: Use a 3/8 x 3-1/2” lag screw and 3/8” washer in the middle hole of the Swing Leg
Bracket.
3: Place bolt caps over exposed threads after securing.
3/8” x 6-1/2”
Carriage Bolt
Torque Washer
3/8”
Washer
3/8” x 3-1/2”
Lag Screw
3/8” Lock Nut
Bolt Cap
Page 60
®