Installation & Assembly

Step 40: Window Supports/Windows
In this step the wood components to attach windows will be installed on the inside of the left of
the playset. Go up on top of the deck and look out the left of the play set.
1: Attach the 5/4 x 6 x 20” Vertical Window Support in the center with 2” wood screws.
2: Attach the 5/4 x 6 x 20” Vertical Window Supports on the sides with 2” wood screws.
3: Attach the 5/4 x 2-1/4 x 11-1/2” Horizontal Window Supports at the bottom with 2” wood
screws.
4: Go to the outside left of the play set and install the Windows with 1-1/4” wood screws.
5: Attac
h the 5/4 x 2-1/4 x 11-1/2” Horizontal Window Supports at the top with 2” wood screws.
5/4 x 6 x 20”
Vertical Window Support
(Install FIRST centered)
5/4 x 6 x 20”
Vertical Window Support
(Install SECOND at 11-1/2”
on both sides)
5/4 x 2-1/4 x 11-1/2”
Horizontal Window Supports
(Install THIRD ush on slats)
Windows
(Install FOURTH. Note 1”
wide frame section is top)
5/4 x 2-1/4 x 11-1/2”
Horizontal Window Supports
(Install FIFTH above windows)
11-1/2”
2-3/8”
11-1/2”
Front of Play Set
Page 70
®