Owner Manual

STEP 55: ROOF SUPPORT ASSEMBLIES

1: LOCATE FOUR 2 X 4 X 51-1/8" ROOF SUPPORT (LEFT), FOUR 2 X 4 X 51-1/8" ROOF SUPPORT

(RIGHT) AND FOUR 5/4 X 6 X 10" ROOF PEAK SUPPORT PIECES.

2: FIND A FLAT SURFACE TO WORK ON. LAY THE ROOF SUPPORTS DOWN ON THE FLAT SURFACE

WITH THE COUNTERSUNK HOLES FACING UP. ALIGN THE ANGLED ENDS OF THE ROOF SUPPORTS

FLUSH WITH ONE ANOTHER. PLACE A ROOF PEAK SUPPORT ON TOP OF THE ROOF SUPPORTS AS

SHOWN. THE EDGES SHOULD BE FLUSH WHERE SHOWN BELOW.

3: USE FOUR #8 X 2" WOOD SCREWS TO ATTACH THE ROOF PEAK SUPPORT TO THE ROOF

SUPPORTS AS SHOWN BELOW.

4: MAKE THREE MORE ROOF SUPPORT ASSEMBLIES BY REPEATING 2 AND 3.

DETAIL B

SCALE 1 : 5

WOOD SCREW

#8 X 2"

FLUSH

ROOF PEAK SUPPORT

5/4 X 6 X 10"

ROOF SUPPORT -LEFT

2 X 4 X 51-1/8"

COUNTERSUNK HOLE FACES UP

USE A CARPENTERS SQUARE TO MAKE

THESE PARTS SQUARE TO ONE ANOTHER.

2 X 4 X 51-1/8"

ROOF SUPPORT -RIGHT