SDS
Safety Data Sheet – Gorilla Mounting Putty
Date Revised: NA
Date Issued: 07/03/2019
FOR CHEMICAL EMERGENCY:
During Business Hours: (800) 966-3458 I Outside Business Hours: (800) 420-7186
Version: 1.0
According to Federal Register / Vol. 77, No. 58 /Monday, March 26, 2012 / Rules and Regulations and according to the Hazardous
Products Regulation / February 11, 2015
Gorilla Mounting Putty SDS
2/5
4.3. Immediate medical attention and special treatment, if necessary
No additional information available
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
:
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media
:
Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
No additional information available
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions
:
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Do not allow fire-fighting water to enter environment.
Protection during firefighting
:
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6 : Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:
Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment
:
Equip cleanup crew with proper protection.
Emergency procedures
:
Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:
On land, sweep or shovel into suitable containers. Minimize generation of dust. Store away
from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7 : Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
Wash hands and other exposed areas with mild soap and water before eating, drinking, or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:
Keep only in the original container in a cool, well ventilated place. Keep container closed when
not in use.
Incompatible products
:
Strong bases. Strong acids.
Incompatible materials
:
Sources of ignition. Direct sunlight.
SECTION 8 : Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Appropriate engineering controls
No additional information available