SDS

Gorilla Weld - Hardener SDS Page 10 of 19
Safety Data Sheet - Gorilla Weld - Hardener
Date Revised: 01/24/2017
Date Issued: 01/24/2017
FOR CHEMICAL EMERGENCY
DURING BUSINESS HOURS: [phone] | OUTSIDE BUSINESS HOURS: [phone]
According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations and according to the Hazardous
Products Regulation (February 11, 2015).
Version 1.0
Newfoundland & Labrador
OEL TWA (ppm)
50 ppm
Nova Scotia
OEL STEL (ppm)
100 ppm
Nova Scotia
OEL TWA (ppm)
50 ppm
Nunavut
OEL STEL (ppm)
100 ppm
Nunavut
OEL TWA (ppm)
50 ppm
Northwest Territories
OEL STEL (ppm)
100 ppm
Northwest Territories
OEL TWA (ppm)
50 ppm
Ontario
OEL STEL (ppm)
100 ppm
Ontario
OEL TWA (ppm)
50 ppm
Prince Edward Island
OEL STEL (ppm)
100 ppm
Prince Edward Island
OEL TWA (ppm)
50 ppm
Québec
VEMP (mg/m³)
205 mg/m³
Québec
VEMP (ppm)
50 ppm
Saskatchewan
OEL STEL (ppm)
100 ppm
Saskatchewan
OEL TWA (ppm)
50 ppm
Yukon
OEL STEL (mg/m³)
510 mg/m³
Yukon
OEL STEL (ppm)
125 ppm
Yukon
OEL TWA (mg/m³)
410 mg/m³
Yukon
OEL TWA (ppm)
100 ppm
Exposure Controls
Appropriate Engineering Controls: Emergency eye wash fountains and safety showers should be available in the immediate vicinity
of any potential exposure. Gas detectors should be used when flammable gases or vapors may be released. Ensure adequate
ventilation, especially in confined areas. Vapors may be uninhibited and polymerize, causing blockage of vents. Proper grounding
procedures to avoid static electricity should be followed. Use explosion-proof equipment. Ensure all national/local regulations are
observed.
Personal Protective Equipment: Gloves. Protective clothing. Protective goggles. Insufficient ventilation: wear respiratory protection.
Materials for Protective Clothing: Chemically resistant materials and fabrics. Wear fire/flame resistant/retardant clothing.
Hand Protection: Wear protective gloves.
Eye Protection: Chemical safety goggles.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn.
In case of inadequate ventilation, oxygen deficient atmosphere, or where exposure levels are not known wear approved respiratory
protection.
Environmental Exposure Controls: Avoid release to the environment.
Other Information: When using, do not eat, drink or smoke
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State
:
Liquid
Appearance
:
Black liquid
Odor
:
Like acrylic
Odor Threshold
:
Not available