SDS

Gorilla Weld - Hardener SDS Page 11 of 19
Safety Data Sheet - Gorilla Weld - Hardener
Date Revised: 01/24/2017
Date Issued: 01/24/2017
FOR CHEMICAL EMERGENCY
DURING BUSINESS HOURS: [phone] | OUTSIDE BUSINESS HOURS: [phone]
According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations and according to the Hazardous
Products Regulation (February 11, 2015).
Version 1.0
pH
:
Not available
Evaporation Rate
:
Not available
Melting Point
:
Not available
Freezing Point
:
Not available
Boiling Point
:
100 °C (212 °F)
Flash Point
:
8.9 °C (48.02 °F) Closed Cup
Auto-ignition Temperature
:
Not available
Decomposition Temperature
:
Not available
Flammability (solid, gas)
:
Not available
Lower Flammable Limit
:
Not available
Upper Flammable Limit
:
Not available
Vapor Pressure
:
Not available
Relative Vapor Density at 20°C
:
Not available
Relative Density
:
Not available
Specific Gravity
:
0.979 g/cm³
Solubility
:
Not available
Partition Coefficient: N-Octanol/Water
:
Not available
Viscosity
:
Not available
SECTION 10: STABILITY AND REACTIVITY
Reactivity: Reacts violently with strong oxidizers. Increased risk of fire or explosion. The product is normally supplied in a stabilized
form. If the permissible storage period and/or storage temperature is exceeded, the product may polymerize with heat evolution.
Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing substances,
and/or heavy metal ions. Product reacts violently or explosively with alkali metals, alkaline earth metals, various metal powders,
strong alkalis, ammonia, and other incompatible materials. Reacts vigorously with water producing heat. Contact with metals and
water liberates hydrogen.
Chemical Stability: As supplied, this product is stabilized with inhibitors. Extremely flammable liquid and vapor. May form
flammable or explosive vapor-air mixture.
Possibility of Hazardous Reactions: This product has been stabilized by inhibitors. Hazardous reactions will not occur under normal
conditions. Contains methacrylate compounds that uninhibited can undergo hazardous polymerization at elevated temperatures, or
when exposed to strong oxidizers or UV light. Take appropriate precautions to avoid these conditions.
Conditions to Avoid: Direct sunlight, extremely high or low temperatures, heat, hot surfaces, sparks, open flames, incompatible
materials, and other ignition sources.
Incompatible Materials: Strong acids, strong bases, strong oxidizers. Free radical initiators. Peroxides. Reducing agents. Heavy
metal ions. Epoxides. Ultraviolet light. Direct sunlight. Alkali metals. Alkaline earth metals. Various metal powders. Strong alkalis.
Ammonia.
Hazardous Decomposition Products: Under normal conditions of storage and use, hazardous decomposition products should not
be produced.
SECTION 11: TOXICOLOGICAL INFORMATION
Information on Toxicological Effects - Product
LD50 and LC50 Data: Not available
Skin Corrosion/Irritation: Causes skin irritation.
Acute Toxicity (Oral): Not classified
Acute Toxicity (Dermal): Not classified
Acute Toxicity (Inhalation): Not classified