MSDS

Gorilla Wood Glue
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2014 EN (English US) 3/5
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters No Occupational Exposure Limits (OELs) have been established for this product or its chemical components.
Exposure Controls
Appropriate Engineering Controls: Emergency eye wash fountains and safety showers should be available in the immediate vicinity
of any potential exposure. Ensure adequate ventilation, especially in confined areas. Ensure all national/local regulations are
observed.
Personal Protective Equipment: Protective clothing. Safety glasses. Gloves. If insufficient ventilation: wear respiratory protection.
Materials for Protective Clothing: Chemically resistant materials and fabrics.
Hand Protection: Wear chemically resistant protective gloves.
Eye Protection: Chemical goggles or safety glasses.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: Use a NIOSH-approved respirator or self-contained breathing apparatus when using in a poorly ventilated
area.
Other Information: When using, do not eat, drink or smoke.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State : Liquid
Appearance : Light Tan, Milky
Odor : Sweet
Odor Threshold : Not available
pH : 2.5 - 3.5
Relative Evaporation Rate (butylacetate=1) : Not available
Melting/Freezing Point : Not available
Boiling Point : 100 °C (212 °F)
Flash Point : Not available
Auto-ignition Temperature : Not available
Decomposition Temperature : Not available
Flammability (solid, gas) : Not available
Upper and Lower Flammable Limits : Not available
Vapor Pressure : Not available
Relative Vapor Density at 20 °C : Not available
Specific Gravity/Relative Density : 1.08 g/cm³ @ 25 °C (77 °F)
Solubility : Not available
Partition coefficient: n-octanol/water : Not available
Viscosity, Dynamic : 4000 - 6000 cP @ 25 °C (77 °F)
Explosion Data – Sensitivity to Mechanical Impact : Not expected to present an explosion hazard due to mechanical impact.
Explosion Data – Sensitivity to Static Discharge : Not expected to present an explosion hazard due to static discharge.
SECTION 10: STABILITY AND REACTIVITY
Reactivity: Hazardous reactions will not occur under normal conditions.
Chemical Stability: Stable under recommended handling and storage conditions (see section 7).
Possibility of Hazardous Reactions: Hazardous polymerization will not occur.
Conditions to Avoid: Direct sunlight. Extremely high or low temperatures.
Incompatible Materials: Strong acids, strong bases, strong oxidizers, and materials that react with water.
Hazardous Decomposition Products: Carbon oxides (CO, CO
2
). Oxides of aluminum.