Safety Guide

Instruction for GAT-1000
4.5 Digital Input port
Detect the input signal level on digital input pins of the device. The input signal level could be at
High or Low level.
Mode
Voltage
High Level Input > 5.7V
Low Level Input
<= 5.7V
◇ GEM
Item
Script
Qualifier
Description
Event
Subevent Input_High
<Qualifier>;
Pin number, value is 0-15 Switch from low level to high level
Subevent Input_Low
<Qualifier>;
Pin number, value is 0-15 Switch from high level to low level
Subevent Input_Chg
<Qualifier>;
Pin number, value is 0-15 As long as it is level switching
Subevent
input_equate
<Qualifier>
Value correspond to input
bit0 = Ignition;
bit1-bit7: Input 1 – Input7
It only judges in1- in7.
It does not include in0 (IGN).
SET: High CLEAR: Low
All input pin status meet the
setting conditions, triggers.
Sate
Status input high
<Qualifier>
Pin number, value is 0-15 Switch from low level to high level
Status input
compare <
Qualifier>
Value correspond to input
bit0 = Ignition;
bit1-bit7: Input 1 – Input7
It only judges in1- in7.
It does not include in0 (IGN).
SET: High CLEAR: Low
check if multiple inputs meet
set conditions, operate per each bit