Safety Guide

Instruction for GAT-1000
1. GAT1000 Introduction
The GAT1000 device is a powerful GPS positioning tracker that supports remote sensing
technology and has both safety and convenience. It is an ultra-low-power, water splash proof
product. The device can detect motion, harsh driving behavior, collision and rollover events.
 Report on fixed timing, fixed distance, fixed turning angle, events.
 Local and Remote upgrade
 Anti-Jamming
 Automatic time zone selection and time calibration
 AGPS
 Over speed monitoring, mileage statistics, engine running hour statistics
 Power monitoring and low-power alerts
 Remote configuration
2. GAT1000 product parameters
Dimensions & Weight
Size
Approx. 137 (length) * 85 (width) * 40 (height) mm
(refer to maximum dimension)
Weight
About 243.8 G without battery
Working
environment
Operating
temperature
-40 ~ +85 ° C (without backup battery)
-10 ~ +50 ° C (with backup battery)
Relative humidity
95% RH @ 50 ° C non-condensing
Vibration U.S. military standard 202G and 810F, SAE J1455
EMC / EMI
SAE J1113; FCC--Part 15B
RoHS
Compatible (optional)
CPU
STM32L4 9 6 VX
Power Supply
External
Power Adapter
Internal
LI-PO 5000mAh (optional)
Charging environment: 0 to + 45ºC
Power Consumption
Sleep mode
200uA 12V
Active tracking mode
100mA 12V
Communication
Data support
SMS & UDP
GSM Antenna Built-in 4G antenna
GSM module HL7688
LTE B2 / LTE B 4 / LTE B 5 / LTE B 17 /
UMTS B2 / UMTS B 5
GSM / GPRS output
power
Level 4 (2W) for 700/ 850 frequency bands
Level 1 (1W) for 1700/ 1800/1900 frequency bands
GSM / GPRS down
GPRS Level 10
HSPA data speed
5.76Mbps UL / 7.2Mbps DL (optional)
SIM card (built-in)
1.8 / 3.3V