ASSEMBLY INSTRUCTIONS FULL BED Thank you for purchasing this quality product. Be sure to check all packing materials carefully ; for small parts which may have come loose #7 inside the carton during shipment. Separate, identify and count all parts and hardware. Compare with the parts list to be sure all parts are present. "DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED" SIZE OF MATTRESS AND FOUNDATION (SUPPORT) This bed is designed to use a twin and junkie The total thickness must not exceed 6" inches.
ASSEMBLY INSTRUCTIONS FULL BED Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and hardware. Compare with the parts list to be sure all parts are present. "DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED" ud a) Tools Required « Use of power tool to assemble this + () Fret metal Please assemble on a clean soft 2:00h surface to avoid damage.
Part List 1: Side Frame PCs 2: Left Back Post 1pc 3: Left Front Post 1pc 4: Left Cap 1pc ~~ 5: Right Back Post 1pc 6: Right Front Post 1pc 7 : Right Cap 1pc ~~ 8: Side Top Panel PCs 9: Bracket PCs 10: Back Cap 1pc pd 11 : Back Frame 1pc 12: Rail PCs 14 : Middle Rail 1pc ~~ 24: Slat PCs
Part List WF282129 1: Side Frame PCs 8: Side Top Panel PCs 9: Bracket PCs ( 24: Slat PCs Part List WF282130 2: Left Back Post 1pc 3: Left Front Post 1pc 4: Left Cap for 1pc \ 5: Right Back Post 1pc 6: Right Front Post 1pc 7 : Right Cap for 1pc \ 10: Back Cap for 1pc 11 : Back Frame 1pc 12: Rail PCs \ 14 : Middle Rail 1pc