Blood Glucose Meter User Manual

GOSSEN METRAWATT GMBH 39
14 Printing via PSI Module (Feature E01)
or with the Printer Adapter (DA-II accessory)
14.1 Print Out Test Data at the PSI Module
Upon completion of a measurement – „Test passed/Test failed“ is shown
on the display – you can print out the measurement data via your PSI
module.
➭ Press the PRINT key at the PSI module to this end.
The print menue is displayed.
➭ Select „Protocol“ with your cursor and acknowledge with
.
➭ Press the PRINT key once more to start the print-out.
A detailed description is given in the operating instructions of your PSI module.
14.2 Printing Test Results in Report Form
Test instruments can be connected to commercially available printers with
the DA-II printer adapter (Z745M), even if they are not equipped with a
parallel port, thus allowing for on-site print-out of test reports etc.
The only prerequisite is that the printer module is set up for direct report
generation.
Note
☞
Only printers disposing of the ASCII type font are suitable for
use.
Connecting a Centronics Printer
Connect the test instrument to a Cen-
tronics printer via the RS 232 port with
the help of the DA-II adapter. The PSI
module may not be connected.
You can shift to the Report menu from
any of the displayed test results
(1
st
page) with the help of the key.
Measurement results for the current
test can be stored to memory, the re-
sults of the current test can be printed
out to the corresponding report form,
previously stored test results can be
queried (scroll: DBmed option, see
chapter 12) and all saved measurement
results can be printed out from this
menu.
Print-out is executed directly to the
Centronics printer via printer adapter
DA-II.
The matching report form is automati-
cally selected for the standard selected with the selector switch.
15 Direct Print-Out (feature KE01, SECU-dd option)
After completion of each test (individual test or at the end of a test
sequence), test results are read out directly via the RS 232 interface. If the SE-
CUTEST
®
PSI has been connected, the results are printed directly to paper.