User manual

LABKON Series
_________________________________________________________________________________________________
GMC-I Messtechnik GmbH 11
1.4 Installation
1.5 Initial Inspection
When you receive your power supply, please check it for any obvious damage that may have occurred during shipment or
resulted from other reasons. If any damage is found, contact the carrier and the Sales Office immediately in order to deal with
it in time.
Keep the original packing materials in case the power supply has to be returned to GMC-I Messtechnik for repairing in the
future. If you return the power supply for service, please attach a tag identifying the owner and model number. A brief
description of the malfuction is also needed.
1.6 Mechanical Check
This check confirms that there are no broken keys or knobs, and that the cabinet and panel surfaces are free from dents and
scratches, and that the display is not scratched or cracked as well.
1.7 Electrical Check
Please see Chapter 2 for an initial operation procedure. When successfully completed, it can be ensured that the power
supply is operating in accordance with its specifications.
1.8 Temperature Control
The power supply’s performance will not be affected when operating within the temperature range of 0°C to 40°C, within the
temperature range of 40°C to 55°C, the over-temperature protection may take effect, depending on the input voltage and
output power. A brushless fan is used to cool the power supply by drawing cool air through the two sides and exhausting the
heat through the fan outlet on the rear panel.
Sufficient space must be left at the rear and two sides of the cabinet for air circulation when the power supply is installed.
Please remove the rubber bumpers for rack mounting.
1.9 Rack Mounting
The power supply could be installed in a standard 19-inch rack.
Please remove the rubber bumpers at the front and end of power supply before installing.