User manual

SSL ELECTRONIC LOAD SERIES 32 EL
12
GMC-I Messtechnik GmbH
Constant resistance setting procedure:
Procedure
Operation details
LCD display
Step 1
Press “R-set” button
Input Password
Step 2
Enter the password (master password: 1556). If the
keyboard isn’t locked, please go to step 4.
Input Password
****
Step 3
Press the “OK ” button, the original set value will be
displayed on the LCD. (It will return to step 2 if your
password is wrong)
Set Resis = 200.0Ω
New=
Step 4
Enter the new resistance value with the number keypad
or rotate the dial to adjust the value
Set Resis = 200.0Ω
New= 50.00
Step 5
Press “R-set” button for confirmation
Set Resis = 50.00Ω
New= 50.00
Step 6
Press ESC to go back to the main menu
You can exit the resistance set operation at any point by pressing the ESC key
2.2.4 Store a program
The SSL KONSTANTER 32 EL Series electronic load provides a program mode for dynamic
testing. The user can program the SSL KONSTANTER 32 EL Series electronic load and define the
load values (current, power, resistance) and duration of every step. For more details about the
programming operation, please refer to 2.3.7.
User’s program may be stored in the SSL KONSTANTER 32 EL’s nonvolatile memory for later
use. Up to 9 programs can be stored in the SSL KONSTANTER 32 EL. To store a program, please
follow this operation procedure:
Procedure
Operation details
LCD display
Step1
Press “ Store ” button
SAVE 1
Step 2
Enter the program number (1 to 9) by using the number
key or the rotary knob
SAVE *
Step 3
Press the “ OK ” button for confirmation. It will return
to Step 2 if the number is out of the range.
You can exit the store operation at any point by pressing the ESC key