User manual

SSL ELECTRONIC LOAD SERIES 32 EL
GMC-I Messtechnik GmbH
9
Chapter 2
Operation
2.1 Connect the DC voltage source to be tested to the electronic load
Fig.2-1 Connect the DC voltage source to the electronic load
2.2 Main functions
1. Constant current mode
2. Constant power mode
3. Constant resistance mode
4. Store a program
5. Recall a program
6. Start a program
7. Stop a program
8. Load On/Off
2.2.1 Constant Current Mode
In constant current mode, the electronic load will sink a constant current in accordance with
the set value regardless of input voltage. The current value can be set with the keyboard and/or rotary
knob. Please see the following operation procedure: