Datasheet
PAGE01 - 28
MULTIMETERS
www.gossenmetrawatt.com
HIGH FREQUENCY PROBE Z3431-2 High Frequency Probe
Z3431-2 High Frequency Probe:
100 kHz - 750MHz, 0.25 ... 50 V AC.
In combination with a multimeter, the Z3431-2
high frequency probe allows for measurement of
alternating voltages with amplitudes of 0.25 to 50V
within a frequency range of 100kHz to 750MHz.
The probe rectifies alternating voltages at a ratio of
1:1. The measuring instrument must have an input
impedance of 10M:.
Type Article
Z3431-2 GTZ3431002R0001
CABLE SETS Cable Sets with Permanently Mounted Test Probes
KS17-ONE KS17-2 KS 29
KS17-S
(adjustable test probe, CAT II / CAT IV)
KS-AP
KS-NTS
KS21-T
KY95-3 Z502U
KY94
Cable sets with permanently mounted test probes
and contact-protected angle plugs for safe
measuring
Hook clips, alligator clips or push-on lugs can be
attached to the test probes for special measuring
tasks.
•
KS17-ONE cable set:
600 V / CAT III, 1 A, 120 cm long
600 V / CAT II, 16 A
•
KS29 cable set:
1000 V / CAT III, 1 A safety cable set for power
meters
•
KS17-2 cable set:
S1000 V / CAT III, 1 A, 600 V / CAT IV, 1 A
1000 V / CAT II, 16 A, 120 cm long
•
KS17-S cable set:
1000 V / CAT II, 150 cm long,
stainless steel test probes, 2mm diameter
•
KS-AP cable set:
1000 V / CAT II, 19A, 1000 V / CAT IV, 1A, with
adjustable test probes, 115cm long
4mm angle plug
•
KS-NTS cable set:
1000 V / CAT II / III, 20 A,
double insulated silicon measurement cables,
120cm long, with one pair each of small test
probes, alligator clips, clip hooks and North
American test probes
•
KS21-T cable set
1000 V / CAT II, 16 A,
200cm long for cable multimeter
•
KY95-3 alligator clip:
1000 V / CAT III, 16 A,
•
Magnetic test probes with 4 mm plug
1000V / CAT III, 4 A
•
KY94 hook clips (1 pair)
Type Article
KS17-ONE Z110K
KS29 Z229A
KS17-2 GTY3620034P0002
KS17-S Z110H
KS-AP Z110S
KS-NTS Z110W
KS21-T Z11OU
KY95-3 Z110J
Magnetic test probes
- 4 mm
Z502U
KY94 GTY3610094P01
MULTIMETER ACCESSORIES