Manualshelf

User Manual

ManualsBrandsGossen Metrawatt ManualsMultimetersGossen Metrawatt METRALINE DM 41 Handheld multimeter Digital CAT III 600 V, CAT IV 300 V Display (counts): 4000
12345678910
GMC-I Messtechnik GmbH 9
2 Initial Start-Up
Batteries
Please refer to chapter 16.1 on page 30 before initial start-up
of your instrument or after a lengthy period of storage.
Switching the Multimeter ON
Turn the function selector switch from the OFF position to the
desired measuring function.
All segments of the LCD are activated briefly.
A drawing of the LCD can be found on page 2.
Note!
Electric discharge and high-frequency interference may
cause incorrect displays and block the measuring
sequence. Reset the multimeter by switching it OFF and
ON again. If this procedure is unsuccessful, briefly dis-
connect the battery from the contact terminals.
Attention!
!
Before opening, disconnect the multimeter from the measur-
ing circuit and observe chapter 16 on page 30.
Automatic Meter-OFF (MoFF)
Your multimeter switches OFF automatically after 15 minutes if
no keys or the function selector switch have been activated
during this time.
Switching the multimeter back ON
Activate the HOLD key.
Switching the multimeter OFF
Turn the function selector switch to the OFF position.