Datasheet

ManualsBrandsGOSSEN METRAWATT ManualsTest & MeasurementHandheld multimeter digital METRAHIT BASE Calibrated to DAkkS standards CAT III 1000 V, CAT IV 600 V D

METRAHIT X-TRA OUTDOOR TECH PRO BASE

TRMS Digital Multimeters

3-349-350-03

13/1.18

GMC-I Messtechnik GmbH

DAkkS Calibration Certificate included

German

Accreditation Body

D-K-15080-01-01

Applications

The multimeter is suitable for universal use in electrical

engineering, electrical installation, laboratory applications,

telecommunication, training etc.

The instrument can be used in the field and is equipped with

internal, mains-independent supply power.

Features

Three Connector Jacks with Automatic Blocking Sockets (ABS)

All current ranges are implemented via a single connector jack

which prevents any possibility of operator error.

Beyond this, the automatic blocking sockets prevent incorrect

connection of the measurement cables, as well as selection of the

wrong measured quantity.

Danger to the user, the instrument and

the device under test resulting from operator error is thus ruled out.

Patented (patent no. EP 1801 598, US 7,439,725)

Overload Protection

The instrument is safeguarded for up to 1000 V in all measuring

functions by overload protection. Voltages of greater than 1000 V

and current of greater than 10 or 16 A are indicated acoustically.

Dangerous contact voltages are indicated when the 1 kHz low-

pass filter is activated.

The FUSE display appears at

METRA

HITX-

TRA

METRA

HITO

UTDOOR

METRA

HITT

ECH

and

METRA

HITP

instruments in order to indicate that

the fuse for the current measuring input has blown.

RMS Value with Distorted Waveshape

The utilized measuring method allows for waveshape

independent RMS measurement (TRMS AC and AC+DC) for

voltage and current (METRAHITX-

TRA OUTDOOR up to 20 kHz).

Activatable Filter for V AC Measurement

A 1 kHz low-pass filter can be activated if required, for example

when measuring motor voltage at electronic frequency

converters. The input signal is checked by a voltage comparator

for dangerous voltages as long as the low-pass filter is activated.

Measuring 5 V Square-Wave Signals with the METRA

HITX-

TRA

UTDOOR

This function makes it possible to test circuits and transmission

cables by measuring the frequency and the duty cycle of pulses

with amplitudes of 2 to 5 V and frequencies of 100 Hz to 1 MHz.

Analog Scale for Quick Trend Display – Bar Graph or Pointer

The analog scale (with additional negative range for zero-

frequency quantities) allows for faster recognition of measured

value fluctuation than is possible with a digital display.

The instrument can be switched back and forth between bar

graph and pointer display.

• Digital Hand-Held Multimeters with RMS Measurement

AC TRMS

, V

AC+DC TRMS

, V

, Hz (V), Hz (A),



, V , °C/°F (TC)

• 4½-place display (11,999 digits), with display illumination

METRAHITBase

• Current measurement via clip-on current sensors:

The transformation factor is adjustable from 1 mV:1 mA to

1 mV:1 A and is accounted for by the display.

METRAHITT

ECH

• Direct Current measurement with increased accuracy and

Current measurement, via clip-on current transformer and sensors

• Broad range capacitance measurement

METRAHITX-

TRA OUTDOOR TECH PRO

• Additional “low-resistance” (1 M



) alternating voltage measurement

• 1 kHz / -3 dB low-pass filter can be activated

METRAHITX-

TRA OUTDOOR

• Direct current measurement from 10 nA to 10 A, 16 A for short periods

• Temperature measurement with Pt100(0) resistance thermometer

• Broad range capacitance measurement

• Frequency and duty cycle measurement at 2 to 5 V signals or up to 1 MHz

• Data memory and bidirectional infrared interface

METRAHITO

UTDOOR

• Extremely rugged, dust and water-proof variant with

IP 65 protection

Summary of content (8 pages)

PAGE 1
METRAHIT X-TRA OUTDOOR TECH PRO BASE TRMS Digital Multimeters • • 3-349-350-03 13/1.18 Digital Hand-Held Multimeters with RMS Measurement VAC TRMS, VAC+DC TRMS, VDC, Hz (V), Hz (A), , V , °C/°F (TC) 4½-place display (11,999 digits), with display illumination METRAHITBase • Current measurement via clip-on current sensors: The transformation factor is adjustable from 1 mV:1 mA to 1 mV:1 A and is accounted for by the display.
PAGE 2
METRAHIT X-TRA OUTDOOR TECH PRO BASE TRMS Digital Multimeters Automatic or Manual Measuring Range Selection Measured quantities are selected by means of a rotary switch and a function key. The measuring range is automatically matched to the measured values. The measuring range can also be selected and fixed manually with a key. Fast Acoustic Continuity Test Testing for short circuiting and interruption is possible with the selector switch in the position.
PAGE 3
METRAHIT X-TRA OUTDOOR TECH PRO BASE TRMS Digital Multimeters Characteristic Values Meas. Function Measuring Range V 100 mV 1 V 10 V 100 V 1000 V Resolution at Upper Range Limit 11,999 10 100 1 10 100 ~/ 1199 V V mV mV mV Intrinsic Uncertainty under Reference Conditions (... % rdg. + ... d) (... % rdg. + ... d) (... % rdg. + ... d) Input Impedance 9 9 9 9 9 M M M M M ~ 10) 9 M // < 50 pF 9 M // < 50 pF 9 M // < 50 pF 9 M // < 50 pF 9 M // < 50 pF 0.
PAGE 4
METRAHIT X-TRA OUTDOOR TECH PRO BASE TRMS Digital Multimeters Internal Clock Time format DD.MM.YYYY hh:mm:ss Resolution 0.1 s Accuracy 1 min. per month Temperature Influence 50 ppm/K Influencing Quantity Sphere of Influence Measured Quantity / Measuring Range 1) Common Mode Interference Voltage Series Mode Interference Voltage 0.4 + 10 100  ... 1 M 0.5 + 10 > 1 M 1) 1 + 10 mA/A 0.5 + 10 mA/A 0.8 + 10 10 nF ... 100 F 1+5 Hz 0.2 + 10 C/F (Pt100/Pt1000) 0.
PAGE 5
METRAHIT X-TRA OUTDOOR TECH PRO BASE TRMS Digital Multimeters Power Supply Fuse for METRAHITX-TRA OUTDOOR TECH PRO Battery Fuse 2 ea. 1.5 V mignon cell (2 ea. size AA), alkaline manganese per IEC LR6 (2 ea. 1.2 V NiMH rechargeable battery also possible) Service life with alkaline manganese: approx. 200 hours Battery test Battery capacity display with battery symbol in 4 segments: . Querying of momentary battery voltage via menu function.
PAGE 6
METRAHIT X-TRA OUTDOOR TECH PRO BASE TRMS Digital Multimeters Accessories for Operation at a PC (METRAHITX-TRA OUTDOOR only) Interface Adapter for USB Connection The USBX-TRA bidirectional interface adapter includes the following functions: • Configure the METRAHITX-TRA OUTDOOR from a PC. • Transmit live measurement data to the PC. • Read out data from memory at the METRAHITX-TRA OUTDOOR. The adapter does not require a separate power supply. Its baud rate is 38,400 baud.
PAGE 7
METRAHIT X-TRA OUTDOOR TECH PRO BASE TRMS Digital Multimeters Order Information Designation Designation Type Article Number METRAHITX-TRA, METRAHITOUTDOOR, METRAHITTECH, METRAHITPRO and METRAHITBase Multimeters 4½-place (12,000 digits) TRMS multimeter with direct, alternating and pulsating voltage measurement (TRMS values), frequency measurement, resistance measurement, continuity test, diode measurement andtemperature measurement with type K thermocouples LCD with 15 mm characters, analog bar graph and
PAGE 8
METRAHIT X-TRA OUTDOOR TECH PRO BASE TRMS Digital Multimeters Current Measuring Accessories All current sensors and transformers are equipped with a connector cable (1.2 to 1.5 m long) with 4 mm safety banana plugs Max. Transformation Frequency Type Designation Measuring Range Meas. Category Wire Dia. Factor Range DC/AC Current Sensors with Voltage Output CP30 DC/AC clip-on current sensor, 5 mA to 30 A with battery mode (30 h) (DC / AC pk) CP330 DC/AC clip-on current sensor, Range: 0.5 ...