Datasheet

ManualsBrandsGOSSEN METRAWATT ManualsTest & MeasurementHandheld multimeter digital METRAHIT Energy Calibrated to DAkkS standards CAT III 600 V, CAT IV 300 V

METRAHIT⏐ENERGY

TRMS SYSTEM Multimeter

3-349-574-03

7/1.18

GMC-I Messtechnik GmbH

DAkkS Calibration Certificate as Standard Feature

German

Accreditation Body

D-K-15080-01-01

Applications

The power multimeter is extremely rugged and reliable with a

housing made of impact resistant ABS. With a resolution of

60,000 digits and more than 35 different measuring functions, it’s

been developed for professional use.

Features

Power and Energy Measurement

The METRAHIT ENERGY is a compact power meter for direct and

alternating current in single-phase systems. The electrical circuit

can be connected either directly, or via a current transformer. If a

current transformer is connected to the multimeter (mA/A input),

all current and power displays are represented with the correct

value based upon the selected transformation ratio.

Universal power measurement includes the following measuring

functions: active, reactive and apparent power, power factor and

energy.

Beyond this, the mean power value can be generated over a

specified time period (e.g. 15 min.), and the corresponding maxi-

mum value can be recorded along with time of occurrence. Suit-

able AC current transformers with current output are listed on

page 10.

Using shunt resistor SR9800 in combination with current clamp

sensor CP1800 allows for the power and energy measurement of

DC applications with high currents as well, such as for measure-

ments at photovoltaic systems.

Systematic Voltage Quality Analysis

The METRAHIT ENERGY is equipped with a function for acquiring

and recording power disturbances which is unique amongst the

handheld multimeters. It allows for simultaneous, continuous

recording of voltage characteristics and event-triggered recording

of the following disturbances:

• Under and overvoltage with start time, duration and extreme value

• Under and overvoltage of the half-period RMS value (dips and

swells) with start time, as well as min. and max. values

• Momentarily exceeded values with a duration of greater than

1 ms (peak) with time of occurrence and maximum value

• Steep transients with a rise time of 0.5 to 5 ms within a range

of 200 to 1000 V including time of occurrence, relative voltage

value and the previous 1 ms instantaneous value

Harmonic Analysis

In the

and current measurement (A) switch positions, har-

monic analysis is performed approximately once per second

using 32 sampling values per mains period (adjustable to 16.7,

50, 60 or 400 Hz).

FFT (fast Fourier transformation) makes oscillations up to the 15

harmonic available to this end. These are used to calculate the

RMS values of the fundamental harmonic (HD 1) and the individ-

ual higher harmonics (HD 2 ... 15), as well as total harmonic dis-

tortion (THD). RMS values and harmonic components are dis-

played in each case (RMS values relative to the RMS value of the

fundamental harmonic). Harmonic analysis is also available for

current clamp measurement.

• Digital hand-held multimeter with TRMS measurement including:

V AC TRMS, V AC+DC TRMS with a bandwidth of 100 kHz, V

DC, dB, Hz (V), Hz (A), Ω, μF, V , °C/°F (TC/RTD)

• Power measurement (W, VAr, VA, PF): active, reactive and

apparent power with extreme values, power factor

• Energy measurement (Wh, VArh, VAh)

active, reactive and apparent energy, mean power value with

adjustable observation period and maximum value

• Mains quality analysis: recording of over and undervoltage,

dips, swells, voltage peaks and transients in 0, 50 and 60 Hz

systems

• Harmonic analysis: RMS values and distortion components up

to the 15

harmonic at 16.7, 50, 60 and 400 Hz

• Special measuring functions: crest factor CF, conductivity nS,

low resistance R

, duty cycle %, cable length km

• Resolution of 60,000 digits, triple display, display illumination

can be activated under difficult lighting conditions

• 1 kHz / –3 dB low-pass filter can be activated

• Direct current measurement from 10 nA to 10 A, 16 A intermit-

tently, current measurement with current transformer clamp and

sensors

transformation ratio is taken into account at the display

• Large data memory for up to 300,000 measured values

• Instrument is completely remote controllable without activating

the rotary switch or changing current sockets

Summary of content (10 pages)

PAGE 1
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter • • • • • • • • • • • Digital hand-held multimeter with TRMS measurement including: V AC TRMS, V AC+DC TRMS with a bandwidth of 100 kHz, V DC, dB, Hz (V), Hz (A), Ω, μF, V , °C/°F (TC/RTD) Power measurement (W, VAr, VA, PF): active, reactive and apparent power with extreme values, power factor Energy measurement (Wh, VArh, VAh) active, reactive and apparent energy, mean power value with adjustable observation period and maximum value Mains quality analysis: record
PAGE 2
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter Convenient Triple Display The momentary measured value and up to two additional values are displayed simultaneously, for example: • Extreme value with date and time • Frequency and RMS value of AC measuring voltage Or in the case of power measurement: • Momentary measured values of active power, voltage and current • Maximum value for periodic power with date and time User Safety and Overload Protection Dangerous alternating contact voltages of greater then 30 V and di
PAGE 3
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter Battery Charging Status – Power Saving Circuit The battery charging status is indicated by means of four symbols. The device is switched off automatically if the measured value remains unchanged for a period of between 10 and 59 minutes (adjustable), and if none of the controls are activated during this time (automatic shutdown is deactivated for power and energy measurement as well as for power quality analysis).
PAGE 4
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter Characteristic Values Meas. Function Measuring Range V 60 mV 600 mV 6 V 60 V 600 V dB A A A 0.6 ... 600 V~ 600 μA 6 mA 60 mA 600 mA 6 A 10 A Factor: 1:1/10/100/1000 0.06, 0.6, 6, 60 A 0.6, 6, 60, 600 A 6, 60. 600, 6000 A 0.
PAGE 5
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter Crest Factor CF Measuring range: 1.0 ≤ CF ≤ 11.0; resolution: 0.1 Typical (not specified) maximum deviation: CF ≤ 3.0 ±0.2 ±0.2 ±0.5 Not valid Maximum Permissible Crest Factor Frequency 10 to 70 Hz 70 to 440 Hz 440 Hz to 1 kHz > 1 kHz 3.0 < CF ≤ 5.0 ±0.2 ±0.5 Not valid Not valid Intrinsic Uncertainty and Frequency Influence for Power and Energy Measurement Measured Quantity 5.0 < CF ≤ 10.0 ±0.5 Not valid Not valid Not valid 1 3 0.3 + 10 0.
PAGE 6
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter Influencing Quantities and Influence Error Influencing Quantity Sphere of Influence Measured Quantity / Measuring Range Response Time (after manual range selection) Influence Error per 10 K ±(...% rdg. + ... d) 1 60 mV 0.2 + 5 600 mV 0.3 + 20 V , 6 ... 600 V 0.2 + 10 60 MΩ 8s 600 Ω ... 60 MΩ, nS 0.2 + 5 Continuity (acoustic signal) < 50 ms A , 0.2 + 10 °C (Pt100) Max. 3 s 60 nF ... 6 μF, km 1+5 3+5 60 nF ... 600 μF Max. 2 s 0.
PAGE 7
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter Display Electrical Safety Per IEC 61010-1:2010/VDE 0411-1:2011 Protection class Measuring category Operating voltage Pollution degree Test voltage Transreflective LCD panel (65 x 36 mm) with display of up to 3 measured values, unit of measure, type of current and various special functions. Background Illumination LED fiber-optic background illumination is switched off approx. 1 minute after it has been activated.
PAGE 8
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter Accessories NA X-TRA Power Pack (90 ...
PAGE 9
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter Order Information Transport Accessories Designation Type Professional, digital TRMS multimeter with power measurement. Triple digital display with a resolution of 60,000 digits. Multimeter functions: voltage and current (DC and TRMS AC and AC+DC), frequency, resistance, diode, temperature, power, energy and power quality, data logger and IR interface.
PAGE 10
METRAHIT⏐ENERGY TRMS SYSTEM Multimeter Accessories for Current and Power Measurement All current sensors and transformers are equipped with a terminal with 4 mm safety banana plugs. Type Designation Measuring Range Meas. Max. Transformation Category Cable Ratio Diameter DC/AC Current Sensors with Voltage Output CP30 DC-AC current sensor clamp 5 mA to 30 A 300 V 25 mm 100 mV/A (DC / AC pk) with battery operation (30 h) CAT III CP330 DC-AC current sensor clamp Range: 0.5 ...