Datasheet

3-349-590-03
8/12.16
GMC-I Messtechnik GmbH
METRACLIP 41 / 410
AC / DC current clamps
Applications
The METRACLIP 41/410-current clamp meters have been designed
for accurate, contactless measurement of AC and DC currents
as well as for complex waveform currents.
Features
Power Saving Circuit
The devices are switched off automatically after 10 minutes if
none of its keys has been activated during this time. Automatic
shutdown can be deactivated.
DATA HOLD
The measured value can be retained in the display via the HOLD
key.
Automatic Zero Balancing
By pressing the zero balancing key, the output voltage is auto-
matically balanced to zero.
Applicable Regulations and Standards
Characteristic Values
1) DC or AC
pk
2)
Specification applicable for DC and 15 ... 200 Hz
General:
DC accuracy ±1% of rdg., ±5 digits
Operating voltage 300 V AC
RMS
or DC
Key: rdg. = reading (measured value)
IEC 61010-1/EN 61010-1/
VDE 0411-1
Safety requirements for electrical equipment for
measurement, control and laboratory use
– General requirements
EN 60529
VDE 0470, part 1
Test instruments and test procedures
Degrees of protection provided by enclosures (IP code)
EN 61010-2-032/
VDE 0411-2-032
Special requirements for current clamps
DIN EN 61326
VDE 0843, part 20
Electrical equipment for measurement, control and
laboratory use – EMC requirements
METRACLIP 41 METRACLIP 410
Measuring Range
1)
0 ... 4 ...40 A 0 ... 100 ... 400 A
Resolution ... 4 A: 1 mA
... 40 A: 10 mA
... 40A: 10 mA
... 400A: 100 mA
Overload capacity (60 s) 200 A 600 A
General accuracy ±1% of rdg. ± 5 D
2)
±1% of rdg. ± 5 D
Temperature Coefficient ±0.1% of rdg./°C
Frequency range DC and 15 ... 400 Hz
• METRACLIP 41: suitable for automotive production, manufacturing,
service as well as for 4 ... 20 mA in the industrial sector
• METRACLIP 410: suitable for application as a classic electrician’s
tool
• Opening angles of current clamp brackets
METRACLIP 41: 25mm dia.
METRACLIP 410: 25 mm dia.
•TRMS reading
• Autoranging
• Measured value storage (DATA HOLD)
• Automatic zero balancing
• Auto Power Off
• Using advanced Hall Effect technology
• UL listed