Datasheet
GMC-I Messtechnik GmbH 3
PROFITESTMTECH+, MPRO, MXTRA, SECULIFEIP
DIN VDE 0100/IEC 60364-6 Testers
Data Interface
Measurement data are transmitted to a PC via the integrated USB
port, at which they can be printed in report form and archived.
Software update
The test instrument is always kept current thanks to firmware
which can be updated via the USB port. Software is updated
during the course of recalibration by our service department, or
directly by the customer.
Sample Displays
PROFITEST MASTER and SECULIFE IP Test Instruments
Softkeys allow for convenient selection of sub-functions and
parameter settings. Unavailable sub-functions and parameters
are automatically prevented from appearing at the display.
The above sample displays are taken from the PROFITEST MTECH+ instruments.
Applicable Regulations and Standards
Characteristic Values
Nominal Ranges of Use
Voltage U
N
120 V (108 132 V)
230 V (196 253 V)
400 V (340 440 V)
Frequency f
N
16
2
/
3
Hz
(15.4 18 Hz)
50 Hz (49.5 50.5 Hz)
60 Hz (59.4 60.6 Hz)
200 Hz (190 210 Hz)
400 Hz (380 420 Hz)
Overall voltage range
65 550 V
Overall frequency range 15.4 420 Hz
Waveform sine
Temperature range 0 C +40C
Battery voltage 8 12 V
Line impedance angle Corresponds to cos =1 0.95
Probe resistance < 50 k
RCD Measurement Loop Resistance Measurement
Earthing Resistance Measurement Low-Resistance Measurement
Insulation Measurement Voltage Measurement
IEC 61010-1 / EN 61010-1/
VDE 0411-1
Safety requirements for electrical equipment for mea-
surement, control and laboratory use
Part 1: General requirements
(IEC 61010-1:2010 + Cor. :2011)
Part 31: Safety requirements for hand-held probe as-
semblies for electrical measurement and test
(IEC 61010-031:2002 + A1:2008)
IEC 61557/ EN 61557/
VDE 0413
Part1: General requirements (IEC 61557-1:2007)
Part 2: Insulation resistance (IEC 61557-2:2007)
Part 3: Loop impedance (IEC 61557-3:2007)
Part 4: Resistance of earth connection and equipotential
bonding (IEC 61557-4:2007)
Part 5: Resistance to earth (IEC 61557-5:2007)
Part 6: Effectiveness of residual current devices (RCD) in
TT, TN and IT systems
(IEC 61557-6:2007)
Part 7: Phase sequence (IEC 61557-7:2007)
Part 10:Electrical safety in low voltage distribution sys-
tems up to 1000 V AC and 1500 V DC – Equip-
ment for testing, measuring or monitoring of pro-
tective measures (IEC 61557-10:2000)
Part 11:Effectiveness of residual current monitors
(RCMs) type A and type B in TT, TN and IT sys-
tems (IEC 61557-11:2009)
(PROFITEST MXTRA
only
)
EN 60529
VDE 0470, part 1
Test instruments and test procedures
Degrees of protection provided by enclosures (IP code)
DIN EN 61326-1
VDE 0843-20-1
Electrical equipment for measurement, control and labo-
ratory use – EMC requirements
– Part 1: General requirements
IEC 60364-6-61
VDE 0100, part 600
Low-voltage electrical installations
– Part 6: Tests
IEC 60364-6-62
EN 50110-1
VDE 0105, part 100
Operation of electrical installations
– Part 100: General requirements
IEC 60364-7-710
VDE 0100, part 710
Erection of low-voltage installations
– Requirements for special installations or locations
– Part 710: Medical locations
IEC 61851-1
DIN EN
61851-1
Electric vehicle conductive charging system
– Part 1: General requirements