Information

© Gossen Metrawatt GmbH
Erstellt in Deutschland • Änderungen / Irrtümer vorbehalten • Eine PDF-Version finden Sie im Internet
Edited in Germany • Subject to change, errors excepted • PDF version available on the Internet
Alle Handelsmarken, eingetragenen Handelsmarken, Logos, Produktbezeichnungen und Firmennamen sind das Eigentum ihrer jeweiligen Besitzer.
All trademarks, registered trademarks, logos, product names, and company names are the property of their respective owners.
Gossen Metrawatt GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Telefon/Phone [phone]
Telefax/Fax [phone]
E-Mail [e-mail]
www.gossenmetrawatt.com
In order to provide our customers always with the latest version of
our detailed operating instructions, we have decided to offer them
for download from our homepage in the future instead of enclos-
ing a CD ROM with our test and measuring instruments as has
been customary practice so far.
Please refer to our web address
www.gossenmetrawatt.com
for the respective operating instructions including all sections on
safety, initial start-up, operation and maintenance in the available
languages.
Registration
Registration on
www.gossenmetrawatt.com → Button myGMC
• back up for Serial Number
• free Downloads
• Info Hotline
Safety Features and Precautions
This instrument fulfills the requirements of the applicable EU
guidelines and national regulations. We confirm this with the CE
mark. The relevant declaration of conformity can be obtained from
Gossen Metrawatt GmbH.
The electronic measuring and test instrument is manufactured
and tested in accordance with safety regulations IEC 61010-1/
EN 61010-1/VDE 0411-1 and EN 61557.
Safety of the operator, as well as that of the instrument, is only
assured when it is used for its intended purpose.
Read the operating instructions thoroughly and carefully before using
your instrument. Follow all instructions contained therein. Make sure that
the operating instructions are available to all users of the instrument.
Relevant tests may only be executed by a qualified electrician.
The measuring and test instrument may not be placed into service:
• If the battery compartment lid has been removed
• If external damage is apparent
• If connector cable or measuring adapters are damaged
• If the instrument no longer functions flawlessly
• After extraordinary damage due to transport
• After a long period of storage under unfavorable conditions
(e.g. humidity, dust, temperature)
Opening of Equipment / Repair
The equipment may be opened only by authorized service per-
sonnel to ensure the safe and correct operation of the equipment
and to keep the warranty valid.
Even original spare parts may be installed only by authorized ser-
vice personnel.
In case the equipment was opened by unauthorized personnel,
no warranty regarding personal safety, measurement accuracy,
conformity with applicable safety measures or any consequential
damage is granted by the manufacturer.
Any warranty claims will be forfeited when the warranty seal has
been damaged or removed.
Meaning of Symbols on the Instrument
Warning concerning a point of danger
(Attention, observe documentation!)
Protection class II device
Charging socket for extra-low direct voltage
(charger Z502R)
Attention!
Only rechargeable batteries may be inserted when the char-
ger is connected.
This device may not be disposed of with the trash.
Further information regarding the WEEE mark can be
accessed on the Internet at www.gossenme-
trawatt.com by entering the search term “WEEE”.
Indicates European Conformity
Any warranty claims will be forfeited when the warranty
seal has been damaged or removed.
Expert knowledge is required by specialists for
electrical installation or repair work
Special Safety Instructions for Instruments of the
PROFITEST MASTER Series
Using the Test Probe with Coil Cord
Grip and hold the test plug and test probes securely when they
have been inserted, for example, into a socket. Danger of injury
exists if tugging at the coil cord occurs, which may cause the test
plug or test probes to snap back.
Exclusion of Liability
When testing systems with RCCBs, the latter may switch off. This may
occur even though the test does not normally provide for it. Leak-
age currents may be present which, in combination with the test
current of the test instrument, exceed the shutdown threshold
value of the RCCB. PCs which are operated in proximity to such
RCCB systems may switch off as a consequence. This may result
in inadvertent loss of data. Before conducting tests, precautions
should therefore be taken to ensure that all data and programs
are adequately saved, and the computer should be switched off if
necessary. The manufacturer of the test instrument assumes no
liability for any direct or indirect damage to equipment, comput-
ers, peripheral equipment or data bases when performing tests.
Devices with data storage
Data Backup
We advise you to regularly transmit your stored data to a PC in
order to prevent potential loss of data in the test instrument.
We assume no responsibility for any data loss.
GB
!