Datasheet
SECUTESTBASE / PRO and SECULIFE STBASE
Test Instruments for
Measuring
Electrical Safety of Devices
12 GMC-I Messtechnik GmbH
Order Information for Accessories
Designation Type Article number
PC analysis software
Further information regarding software is available on the Internet at:
http://www.gossenmetrawatt.com
( Products Software Software for Testers)
Mains power cable
Cable set for connecting test instruments
to the mains without using a an earthing
contact outlet, and for connecting DUTs.
Consists of coupling socket with 3 perma-
nently connected cables, 3 measurement
cables, 3 plug-on pick-up clips and 2 plug-
on test probes. KS13 GTY3624065P01
Adapter for testing 3-phase current consumers
Adapter for connecting DUTs:
3-pole 16 A, 5-pole 16 A + 32 A,
5 ea. 4 mm socket
– For all tests without line voltage
at single and 3-phase electrical devices
– for differential current measurements
(
direct or differential current method)
CEE Adapter Z745A
16 A / 32 A 3-phase current adapter (test case)
– For all tests without line voltage at single
and 3-phase electrical devices
– For tests at single
and 3-phase extension cords
– For differential current measurements
(direct method)
– für leakage current measurements in
accordance with differential current
method
1
AT3-III-E
D
Z745S
Test adapter for tests on devices with
CEE16 and CEE32 connections
(load rating of max 20 A) AT3-IIS
D
1
Z745T
same as AT3-II-S, however, with a load
rating of 32 A AT3-II S32
D
1
Z745X
3-phase 16 A differential current adapter
AT16-DI Z750A
3-phase 32 A differential current adapter
AT32-DI Z750B
Test adapter with single and 3-phase plug
connectors up to CEE 32A
– For all tests without line voltage at single
and 3-phase electrical devices
– For tests at single
and 3-phase extension cords VL2E Z745W
Adapter cable CEE 16 A 5-pin plug red on
CEE 32 A 5-pin coupling red, 0.5 m,
5 x 1.5 mm²
Adapter cable
CEE16/CEE32 Z750F
Adapter for testing single-phase extension cables
Adapter for testing single-phase extension
cables including earth contact and inlet
plug inserts EL1 Z723A
Plug insert for using adapter EL1
in Switzerland PRO-CH GTZ3225000R0001
Adapter for testing welding units
Test adapter in combination with
SECUTEST... for testing welding units per
DIN EN 60974-4:2007.
The peak-value rectifier in the SECULOAD-
N uses the 1N4007 rectifier diode recom-
mended in the standard.
This is a mains rectifier diode which, due to
its design, is only suitable for voltage
sources with low cycle rates within the
range of the line frequency, or voltage
sources with conventional transformer.
Includes 4 measurement cables and 2 alli-
gator clips. SECULOAD-N Z745R
Designation Type Article number