Operation Manual

GMC-I Messtechnik GmbH 23
Caution Be absolutely certain that only the specified fuses are used!
The use of a fuse with different triggering characteristics, a
different nominal current or a different breaking capacity
places the operator, damping diodes, resistors and other
components in danger.
The use of repaired fuses or short-circuiting of the fuse
holder is prohibited.
Device Return and Environmentally Compatible Disposal
The MAVOWATT 4 is a category 9 product (monitoring and control
instrument) in accordance with ElektroG (German Electrical and
Electronic Device Law). This device is not subject to the RoHS directive.
We identify our electrical and electronic devices (as of August
2005) in accordance with WEEE 2002/96/EG and ElektroG
with the symbol shown to the right per DIN EN 50419.
These devices may not be disposed of with the trash. Please contact
the GMC-I Service GmbH regarding the return of old devices (adress
see below).
7 Repair and Replacement Parts Service
Calibration Center * and Rental Instrument Service
When you need service, please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Straße 20
90471 Nürnberg • Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
This address if for Germany only. Abroad, our representatives or
establishments are at your disposal.
* Calibration Laboratory for Electrical Quantities DKD–K–19701
accredited per DIN EN ISO/IEC 17025:2005
!