Operation Manual

5-35
CH 5/ Start Menu
Section E
Load Data from Card
Overview
Introduction
Data files (.ddb) consist of events that are saved to the data card while monitoring is on.
The 4400 allows users to load stored data directly from card.
In this section
The following topics are covered in this section.
Loading data
from card
Follow these steps to load data from card.
NOTE
If an error message is displayed, refer to Card Error Messages on page 5-36.
Topic See Page
Loading Data from Card 5-35
Card Error Messages 5-36
Action... Result...
STEP 1: From the Start Menu,
press Load data from card. The
4400 lists the data files (.ddb)
stored in card, along with file
size, time and date when the data
files were recorded. Data files are
arranged in the order of date and
time they were recorded.
•Press Up/Down arrow keys to
scroll the page up or down by
one line.
• Press to select (highlight) the
desired data file.
•Press OK to load data from
card to the 4400 and return to
Home screen.
•Press Cancel to quit and return
to Start Menu.
MARK140pg