Operation Manual

5-19
CH 5/ Start Menu
Advanced Options
Advanced setup
options
After selecting a monitoring mode, the system is now ready to begin monitoring and to
record data in card. Prior to actual monitoring, users have the option to accept the
default threshold settings and proceed with monitoring, or to review and/or modify
monitoring settings.
See Chapter 6 Advanced Setup Options for a detailed discussion of each threshold
parameter displayed in the Advanced Options screen.
Action... Result...
STEP 1: From the Choose
Monitoring Mode screen, select
monitoring mode, then press Next
to display Advanced Options.
• If the default settings for the
specified monitoring mode are
acceptable without change,
press Next. Go to page 5-20.
• To review and/or modify
default threshold settings, press
the desired parameter on
screen. Go to Chapter 6
Advanced Setup Options.
•Press Cancel to quit and return
to Start menu.
The following screen will appear if the selected
monitoring mode is non-EN50160:
MARK112
The following screen will appear if the selected
monitoring mode is EN50160 Power Quality:
MARK112b