Operation Manual

1-3
CH 1/ Getting Started
Unpacking the PX5
Introduction
For maximum protection against possible shipping damage, PX5 has been sealed in a
two-piece, plastic suspension pack, enclosed within a durable shipping carton. After
opening the carton, inspect the contents for possible shipping damage and check the
carton inventory.
Unpacking
Unpack the PX5 from the carton as follows:
Shipping
damage
inspection
Visually inspect the PX5 for possible shipping damage. If any damage exists, first
notify and file an insurance claim with your carrier or underwriter or both. Then notify
Dranetz-BMI Customer Service Department of your intentions to return the unit. DO
NOT return the PX5 without prior instructions from Dranetz-BMI Customer Service
Department. Dranetz-BMI Customer Service Department can be reached at (732) 287-
3680 or 1-800-372-6832.
Repacking for
return shipment
If the unit must be returned to Dranetz-BMI for service or repair, wrap the unit securely
in heavy packaging material and place in a well padded box or crate to prevent damage.
Do not return the PX5 in an unpacked box. Dranetz-BMI will not be responsible for
damage incurred during transit due to inadequate packing on your part.
Return notice
Notify Dranetz-BMI Customer Service of your intention of returning the unit. Do not
return the unit without prior instructions from Dranetz-BMI. Dranetz-BMI Customer
Service Department can be reached at [phone] or 1-800-372-6832.
Step Action
1 Remove any remaining literature inside the top of the carton.
2 Carefully remove the PX5 from its shipping carton.
3 Remove all accessories inside the carton. Check that all of the standard
accessories (see page 1-4) are included.