Operation Manual

GMC-I Messtechnik GmbH 2-1
KAPITEL 2
Spannungsmesskabel und Stromzangen anschließen
Übersicht
Einleitung
In diesem Abschnitt werden notwendigen Kabelverbindungen beschrieben, um
grundlegende Spannungsmessungen in 1-phasigen Netzen mit dem MAVOWATT 70
durchführen zu können. Mehrphasige Anwendungen siehe Anhang E.
Inhalt dieses
Kapitels
In diesem Kapitel werden die folgenden Inhalte beschrieben.
WARNING Death, serious injury, or fire hazard could result from improper connection of this
instrument. Read and understand this manual before connecting this instrument.
Follow all installation and operating instructions while using this instrument.
Connection of this instrument must be performed in compliance with the National
Electrical Code (ANSI/NFPA 70-2005) and any additional safety requirements
applicable to your installation.
Installation, operation, and maintenance of this instrument must be performed by
qualified personnel only. The National Electrical Code defines a qualified person
as “one who has the skills and knowledge related to the construction and
operation of the electrical equipment and installations, and who has received
safety training on the hazards involved.
Qualified personnel who work on or near exposed energized electrical conductors
must follow applicable safety related work practices and procedures including
appropriate personal protective equipment in compliance with the Standard for
Electrical Safety Requirements for Employee Workplaces (ANSI/NFPA 70E-2004)
of USA and any additional workplace safety requirements applicable to your
installation.
Inhalt siehe Seite
Spannungsmesskabel anschließen 2-4
Stromzangen anschließen 2-9