User Manual

GMC-I Messtechnik GmbH 15
Operating Overview – Connections, Keys, Rotary Switch, Symbols
User Interface Symbols in the Following Sections
 ...  Scroll through main menu
 ...  Scroll through submenu
  Select decimal point
 Increase/decrease value
time Submenu/parameter (7-segment font)
1nFo Main menu (7-segment font, boldface)
Symbols on the Device
Warning concerning a source of danger
(attention: observe documentation!)
Ground
CAT II
Overvoltage category II (see also “Measuring Categories
and their Significance per IEC 61010-1 ” on page 8 )
Continuous, doubled or reinforced insulation
EC label of conformity
s IR t Position of the infrared interface, window on the top of
the instrument
See also section 3.1 regarding location of the
power pack adapter socket.
Fuse for current measuring ranges, see section 10.3
This device may not be disposed of with the trash. Fur-
ther information regarding the WEEE mark can be
accessed on the Internet at
www.gossenmetrawatt.com by entering the search
term WEEE (see also section 10.5).
Calibration Seal (red seal):
See also “Recalibration” on page 79.
!
5V/600mA
Consecutive number
Registration number
Date of calibration (year – month)
German Calibration Service – calibration lab
B0730
01-04
DKD-K-
19701