User Manual

24 GMC-I Messtechnik GmbH
Control Functions
During Recording
In order to be able to observe measured values during recording,
switch to the measuring function by pressing
MEAS / CAL | SETUP. After pressing MEAS / CAL | SETUP once again,
the display is returned to the 1nfo menu where memory
occupancy can be queried with the 0CuPP parameter.
Note

As soon as memory is full, the “Store” segment is cleared
from the display.
A new memory block is created when another measuring function
is selected with the rotary switch or the OUT | ENTER key. Data stor-
age then continues automatically.
Ending Recording
store stop store
Ð Press MEAS / CAL | SETUP in order to return to the measuring
function.
Ð Memory mode operation can also be exited by switching the
multimeter off.
Querying Memory Occupancy
Memory occupancy can be queried during recording with the
help of the “1nFo” menu (see also section 7.3).
Memory occupancy range: 000.1% to 099.9%.
1nFo bAtt :  ...  0CCvP %: 017 . 4 %
Memory occupancy can be queried before recording is started via
the “1nfo” menu.
1nFo
 ...  StorE 017.4 %  StArt
Clear Memory
This function deletes all measured values from memory! This
function cannot be executed during memory mode operation.
1nFo
 ...  StorE StArt  Clear  yes
empty → StorE
OUT
ENTER
OUT
ENTER
MEAS / CAL
SETUP
OUT
ENTER
MEAS / CAL
SETUP
OUT
ENTER
MEAS / CAL
SETUP
OUT
ENTER
OUT
ENTER