User Manual

34 GMC-I Messtechnik GmbH

V/Hz, Ω, Temperature, and A/Hz Measurements

5.6 Temperature Measurement

Temperature measurement is performed with a thermocouple

(accessory, not included), which is connected to the voltage in-

put. Alternatively, a resistance thermometer can be used.

Selecting the Unit of Measure for Temperature

1nFo

 ...  setup time  ... 

temp unit °C / °F



(°C = default setting)

5.6.1 Measurement with Thermocouples, Temp TC

Ð Set the rotary switch to “Temp

”.

Note



The last selected temperature sensor remains in memory

and is accordingly displayed.

Ð The reference temperature is measured at the internal

reference junction. It is shown in the right-hand auxiliary display

or else can be queried (see parameter “1tEMP” in section 7.3

regarding querying).

Note



The internal reference temperature (temperature of the

internal reference junction) is measured by a temperature

sensor inside of the instrument. This may be somewhat

above room temperature as a result of internal heat-up, or

moving from warmer to colder surroundings or vice versa.

Ð Connect the sensor to the two accessible jacks. The

instrument displays the measured temperature using the

selected unit of measure.

MEAS / CAL

SETUP

OUT

ENTER

OUT

ENTER

OUT

ENTER

–+ +

Temp

100.5

TE (TC)