Datasheet

METRACALMC
Multimeter, Calibrator
Edited in Germany • Subject to change without notice • PDF version available from the Internet
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.gossenmetrawatt.com
Accessories
Interface Adapter for USB Connection
The USB X-
TRA bidirectional interface adapter includes the
following functions:
• Configure the METRACAL MC from a PC.
• Read data out of memory from the METRACAL MC.
The adapter does not require a separate power supply.
Its baud rate is 38,400 baud.
A CD ROM is included which contains current drivers for
Windows operating systems.
Order Information
D)
Data sheet available
1)
in preparation
2)
Refer to our Measuring Instruments and Testers catalog for more current clamp
transformers and sensors.
For additional information regarding accessories please refer to
• Measuring Instruments and Testers catalog
• www.gossenmetrawatt.com
Description Type Article Number
Calibrator, see standard equipment for
METRACAL MC METRACAL MC M245A
Hardware Accessories
Power pack with broad range input:
AC 90 ... 253 V / DC 5 V, 600 V CAT IV NA X-TRA Z218G
Power pack with broad range input:
AC 90 ... 264 V / DC 5,1 V, 1000 V CAT III
low capacitive coupling NA MULTI
1)
Z218K
HC20 hard case
for multimeter (with/without
GH18 rubber holster)
and accessories
HitBag Cordura Belt Pouch
for METRAHIT multimeters (with/
without rubber holster) and
METRAport
Battery set (4 ea. rechargeable NiMH
batteries, 1600 mAh) and charger 1ASi battery set Z206B
Probe for voltage measurement in power
installations to 1000 V KS30 GTZ3204000R0001
Pt100 temperature sensor for surface and
immersion measurements,
–40  +600 C Z3409 GTZ3409000R0001
Pt1000 temperature sensor for
measurement in gases and liquids,
–50  +220 C TF220 Z102A
Pt100 oven sensor, –50  +550 C TF550 GTZ3408000R0001
Ten adhesive Pt100 temperature sensors,
–50  +550 C TS Chipset GTZ3406000R0001
Imitation leather carrying pouch for
METRAHIT F829 GTZ3301000R0003
Cordura belt pouch for METRAHIT
multimeters HitBag Z115A
Imitation leather ever-ready case with cable
compartment F836 GTZ3302000R0001
Ever-ready case for 2 METRAHIT
instruments, 2 adapters and accessories F840 GTZ3302001R0001
Hard case for one METRAHIT and
accessories HC20 Z113A
Hard case for two METRAHIT
instruments and accessories HC30 Z113A
Fuse link for mA current measuring ranges FF0,63A/400V Z109M
Fuse link for calibrator FF0,63A/400V Z109M
Software Accessories
Bidirectional interface adapter, IR-USB USB X-
TRA Z216C
Calibration software for controlling the
METRACAL MC and for analysis of cali-
bration results METRAwin90-2
1)
Z211A
Current Clamp Transformers and Sensors as Accessories
2)
Current clamp transformer, 1 200 A~,
1000:1, 48
65400 Hz WZ11A
D)
Z208A
WZ12A current clamp transformers and sensors ... D
D)
Frequency range: 4565500 Hz, clamp opening: max cable diameter of 15 mm
Current clamp transformer
15 A  180 A, 1000:1 WZ12A Z219A
Current clamp sensor
10 mA  100 A; 100 mV/A WZ12B Z219B
Switchable current clamp sensor,
1mA  15 A; 1 mV/mA
and 1 A  150 A; 1 mV/A WZ12C Z219C
Current clamp transformer
30 mA  150 A, 1000:1 WZ12D Z219D
Description Type Article Number