Datasheet

METRISO PRIME+
Digital High-Voltage Insulation Tester
4 GMC-I Messtechnik GmbH
List of Available Features
1)
If the high-voltage module is purchased after the basic instrument, it can only be
retrofitted by our service department.
2)
Only for line voltage 207 V … 253 V / 49 Hz … 61 Hz
3)
The test instrument can be recalibrated by our calibration service at any time.
We recommend a calibration interval of 1 to 2 years.
Specify the designation of the basic M5000 instrument in your order, as
well as any features which deviate from feature number 0!
Example of a complete type designation (= article number,
= order code) for a MERISO PRIME+:
– Test instrument for German speaking countries with DAkkS
calibration certificate and SECUTEST

PSI printer module:
M5000 A01 E1 I1
Included with Basic Instrument
1 high-voltage insulation measuring instrument with perma-
nently connected measurement cables and test probes,
2 alligator clips (5 kV version)
1 mains power cable and 1 interface cable
1 operating instructions
Report Generating Options
Up-to-date PC software (free starter program or demo software
for data management, as well as report and list generation) can
be downloaded from our website.
Interface cable Z3241 is required for communication between test
instrument and PC.
Features 0 0102040507101543
Country version
(user interface
language, mains
plug type)
A
D
GB
inter-
na-
tional
FRA
F
NLD
NL
ESP
E
ITA
I
CHE
CH
USA
USA
PROFITEST204HP/2.5kV
(not with C1)
B
1)
w/o
with
PROFITEST204HV/5.4kV
(not with C1)
B
1)
w/o
with
2)
Storage batteries
(not with B1, B2)
C w/o
with
DAkkS Calibration
Certificate
3)
E w/o
with
„Guard 5000A“
Measuring cable
G w/o
with
“LEADEX 5000”
extension cable
H w/o
with
SECUTEST PSI
printer module
I w/o
with