Operation Manual

GMC-I Messtechnik GmbH 13
10 Repair and Replacement Parts Service
Calibration Center*
and Rental Instrument Service
When you need service, please contact:
GMC-I Service GmbH
Service-Center
Thomas-Mann-Straße 20
90471 Nürnberg, Germany
Phone [phone]
Fax [phone]
E-mail [e-mail]
www.gmci-service.com
This address is for Germany only. Abroad, our representatives
or establishments are at your disposal.
* DAkkS Calibration Laboratory
for Electrical Quantities D-K-15080-01-01 accredited per DIN EN ISO/IEC 17025
Accredited measured quantities: direct voltage, direct current values, DC
resistance, alternating voltage, alternating current values, AC active power, AC
apparent power, DC power, capacitance and frequency and temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001:2008.
Our DAkkS calibration laboratory is accredited by the Deutsche Akkredi-
tierungsstelle GmbH (National accreditation body for the Federal Republic
of Germany) in accordance with DIN EN ISO/IEC 17025:2005 under reg-
istration number D-K-15080-01-01.
We offer a complete range of expertise in the field of metrology: from test
reports and proprietary calibration certificates right on up to DAkkS calibration
certificates.
Our spectrum of offerings is rounded out with free test equipment manage-
ment.
An on-site DAkkS calibration station is an integral part of our service depart-
ment. If errors are discovered during calibration, our specialized personnel
are capable of completing repairs using original replacement parts.
As a full service calibration laboratory, we can calibrate instruments from
other manufacturers as well.
11 Product Support
When you need support, please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone [phone]
Fax [phone]
E-mail [e-mail]