Datasheet

Edited in Germany • Subject to change without notice • PDF version available on the Internet
METRISO PRO
Analog Insulation, Low Resistance and Voltage Measurement Instrument
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
www.gossenmetrawatt.com
Magnetic Test Probes (patented)
with Magnetic Strain Relief (Z502U)
Z550C Ever-Ready Case
Order Information
For additional information regarding accessories please refer to:
• www.gossenmetrawatt.com
Moving touch protec-
tion reliably covers the
magnetic contact pin
by means of spring
force.
Magnetic
Strain Relief
Description Type Article number
Insulation measuring instrument for DIN VDE 0100, ÖVE-EN 1 (Austria), NIV/NIN SEV
1000 (Switzerland), complies with IEC/EN 61 557/VDE 0413, parts 1, 2, 4 and 10
Test voltages to 1000 V,
voltage measurement to 1000 V,
low-resistance measurement METRISO PRO M550R
METRISO PRO
with test probe for
remote triggering (Z550A) and ever-
ready case (Z550C)
METRISO PRO-Set M551R
Accessories (not included)
Calibration adapter for testing the accu-
racy of instruments used for measuring
insulation resistance and low-resis-
tance for test voltages of up to 1000 V
(per VDE 0413, parts 1, 2 and 4).
ISO calibrator 1 M662A
Cable set consisting of measure-
ment cable and high-resistance
measurement cable for measure-
ments in the G range KS-C Z541F
Cable set consisting of a 4 m long
extension cable with a permanently
attached test probe at one end and a
contact protected socket at the other
end, and 2 alligator clips which can
be plugged onto the test probe KS24 GTZ3201000R0001
Triangular probe for floor measure-
ments per EN 1081, DIN VDE 0100 1081 probe GTZ3196000R0001
Test probe with START/STOP key and
an additional key for illuminating the
measuring point, including shielded
connector cable and test probe
holder for the carrying strap
Test probe for remote
triggering METRISO Z550A
Telescoping rod for PE measurement Telearm 1 GTZ3232000R0001
Reel with 25 m measurement cable TR25 Reel GTZ3303000R0001
Drum with 50 m measurement cable TR50 drum GTY1040014E34
Magnetic test probes with touch pro-
tection – set including magnetic holder
Contact diameter: 5.5 mm, insu-
lated, CAT III 1000 V / 4 A, tempera-
tures from -10 to 60 °C, holding
power under standard conditions
with flat head screws: 1200 g per-
pendicular to the contact surface;
instrument connection: angled multi-
lam plug for instruments from the
METRISO INTRO / BASE / TECH /
PRO / XTRA series
Set 1– magnetic test
probes Z502U
Ever-ready case for
METRISO INTRO / BASE / TECH /
PRO / XTRA with external pocket for
measurement cable
METRISO
ever-ready case Z550C