Operation Manual

SECULIFE ESPRO
DISPLAY PARAMETERS – There are five options of parameters that can be selected for each Display
Zone on the Main Screens. This allows users to custom configure the displays to best suit their needs.
Use to highlight the Display Zone to change and then to sequence through the available
parameters.
NOTE: To save a custom configuration, see Power Up Settings section.
SYSTEM CONFIGURATION SCREEN – The SYSTEM SETUP MODE allows the user to adjust the
configuration of the unit. The Setup Screen can be entered using the key. The parameters can be
changed by using to highlight the line and to toggle the available options.
The Setup Screen can be exited using the key.
Typical Setup Screen
18 GMC-I Messtechnik GmbH