Operation Manual

SECULIFE ESPRO
GMC-I Messtechnik GmbH 21
System Setup Configuration
Parameter Description Range
Load Set 5
Assigns a resistance value for Set 5 from a
combination of the available loads as determined
by the Load Resistance Values set in the Factory
Setup. (See Custom Load Sets for more
information.)
Default = None Selected
0-6,500.0 ohms
Load Set 6
Assigns a resistance value for Set 6 from a
combination of the available loads as determined
by the Load Resistance Values set in the Factory
Setup. (See Custom Load Sets for more
information.)
Default = None Selected
0-6,500.0 ohms
Load Set 7
Assigns a resistance value for Set 7 from a
combination of the available loads as determined
by the Load Resistance Values set in the Factory
Setup. (See Custom Load Sets for more
information.)
Default = None Selected
0-6,500.0 ohms
Load Set 8
Assigns a resistance value for Set 8 from a
combination of the available loads as determined
by the Load Resistance Values set in the Factory
Setup. (See Custom Load Sets for more
information.)
Default = None Selected
0-6,500.0 ohms
Load Set 9
Assigns a resistance value for Set 9 from a
combination of the available loads as determined
by the Load Resistance Values set in the Factory
Setup. (See Custom Load Sets for more
information.)
Default = None Selected
0-6,500.0 ohms
Load Set 10
Assigns a resistance value for Set 10 from a
combination of the available loads as determined
by the Load Resistance Values set in the Factory
Setup. (See Custom Load Sets for more
information.)
Default = None Selected
0-6,500.0 ohms
LCD Contrast
Sets the contrast of the display screen.
Default = 10
0-20
Access Code
In some cases it may be desirable to restrict
access to the System Setup. This sets the
number that must be matched in order to gain
access to the System Setup. If set to 0, the
Access Code feature is disabled. Default = 0
0 to 9999
Software
Displays current software program.
(Read Only)