Operation Manual

SECULIFE ESPRO
FACTORY SETUP SCREEN – The FACTORY SETUP MODE allows for the configuration of system
parameters that the standard user should not access. This setup allows for Calibration of the system.
The Factory Setup Screen can be entered by pressing and holding the key for five seconds while
in the SYSTEM SETUP MODE. This will open an Access Code Window.
Use to change the displayed code to 135. Then is used to access the
FACTORY SETUP MODE.
The parameters can be changed by using to highlight the line and to
toggle the available options. The Setup Screen can be exited using the key.
GMC-I Messtechnik GmbH 27