Operation Manual

SECULIFE ESPRO
POWER UP SETTINGS
The SECULIFE ESPRO allows the user to customize the settings that the unit will have on Power Up.
The “Power up with” parameter in the System Setup Menu allows for the selection of either Default or
Custom selections.
Use to enter the SETUP MODE. Use to select the “Power up with” parameter.
Use to change the parameters to Default, Custom or Set Current as Custom.
The Setup screen can be exited using the key.
Default
If this option is selected, the unit will Power Up to the One Display Zone screen, showing the mV reading.
The default parameters shown in the other Main Screens will be the same as shown in the Main Screens
Section.
Custom
If this option is selected, the unit will Power Up using the unique sets of parameters that were last
customized and saved by the user. Each Main Screen will use the parameters in the Display Zones that
were last configured and saved by the user.
GMC-I Messtechnik GmbH 33