Operation Manual

SECULIFE ESPRO
44 GMC-I Messtechnik GmbH
SECULIFE ESPRO Communication Command Summary
Keywords Nodes
Subnodes
Values
SxZy nn
x is the Screen # (1-5) and y is the Zone # (1-5).
nn=0 to 13:
0=mV RMS
1=mA RMS
2=Watts RMS
3=mV Peak
4=mV Pk-Pk
5=mV Pk / mV Pk-Pk
6=mV Pk+
7=Crest Factor
8=Time-Pulse On
9=Time-Pulse Off
10=Time-Total Cycle
11=% Duty Cycle
12=mV Pulse Cycle
13=mA Pulse Cycle
14=Watts Pulse Cycle
SCReen
Range: 1-7
1-5 = # display zones
6=Measurement List Display
7=Quick Config Screen
DISPlay
AVERaging
FAST, SLOW, MEDium
HOLD
ON,OFF
MODE
TABle, ADJustable
VALue
Table Mode: 1-12 for individual Resistors, 13-22 for resistor sets
1-10
Adjustable Mode: 0-6500.0 Ohms
SETn xxxx
n = Resistor set to configure, 1-10
XXXX = 16 bit Binary value of resistors to include in set 'n'
Where Bit 0 = Load 1, Bit 1 =Load 2… Bit 11 = Load 12
Each bit selects whether the load is included in the set.
Bit = 1 includes the load, Bit = 0 excludes the load.
Example: a value of 9 would select loads 4 and 1 and exclude
everything else
NUMber
1-12 (determines the number of loads present in system)
LOAD
Ln xxxx
n = Load to configure
xxxx = Actual value of load 'n', 0-6500.0 ohms.
ATTen
0.1, 1 (donut attenuation)
RANGe
100, 1000, AUTo
NUMsamples
1024, 2048, 4096, 8192, 16384, 32768
CONFigure
INPut
MODE
CONTinuous, PULsed
POWerup DEFaults, CUStom, SETCurrent
CONtrast 0-20
KEY
DUP, DDN, SUP, SDN, VUP, VDN, SETup, RETurn,
GSAVe, HOLD
SYSTem
VERsion? [read only]