Operation Manual
GMC-I Messtechnik GmbH 103
SECULIFEESXTRA
Local Printing - Local printers are connected to the SECULIFE ESXTRA through a USB port. The
following is an example configuration for local printing.
Printer - Select PCL Inkjet or PCL Laserjet based on the type of printer connected to the SECULIFE
ES
XTRA. Even if the printer name shows up in the list, i.e. OfficeJet H470, select the generic PCL Inkjet or
Laserjet instead.
Port - Select LPT2: for local printing. Even though printing is done through the USB port, it is configured
as LPT2, regardless of which physical USB port the printer is plugged into.
Net Path - This is unused for local printing and can be ignored.
Paper Size - Set to Letter for proper operation.
Draft Mode - This will print with a reduced quality but slightly faster.
Color - Only available for color printers.
Print Range - Leave setting at "All".
Orientation - Leave setting at "Portrait".
Margins - These are currently unused. The SECULIFE ES
XTRA uses margins of 0.5 inches.