Operation Manual
GMC-I Messtechnik GmbH 29
SECULIFEESXTRA
4) Press the Test Load button to open the load configuration box. The screen should look like the
following:
NOTE: The SECULIFE ES
XTRA can be configured to use internal loads, external loads, or a combination
of both. First select the Load Mode, then enter the desired internal and external loads. The total load will
automatically be updated. For most testing, the internal loads will be sufficient.
5) Press the Button next to Internal Load and enter 100 in the number pad. The screen should
automatically return to the Measure RF screen.
6) Key the DUT. The mA measurement will be shown on the SECULIFE ES
XTRA Screen.
NOTE: The displayed measurement can be changed by pressing the mA RMS button. There are many
measurements that can be displayed.