Operation Manual

42 GMC-I Messtechnik GmbH
SECULIFEESXTRA
13)Connect the SECULIFE ESXTRA to the DUT. Connect the Yellow cable from the Active port on the
SECULIFE ES
XTRA to active output on the DUT. Connect the Blue cable from the Dispersive ports of
the SECULIFE ES
XTRA to the return on the DUT.
14)Press Save Configuration on the SECULIFE ES
XTRA to save the Load Curve settings to a file for
future use, or Press Start Load Curve to begin the test. You will be prompted when to start and stop
keying the generator.