Operation Manual

50 GMC-I Messtechnik GmbH
SECULIFEESXTRA
The SECULIFE ESXTRA boots to the main screen by default. The power up screen can be changed in the
System Setup screen. The main screen provides a quick way to select the desired operating mode.
Autosequences
This mode provides for automated DUT testing. Autosequences can consist of any combination of user
instructions, RF measurements, Load Curves, or CQM tests. Autosequences can be edited, loaded, and
saved to either on board memory or external USB flash drives.
Measure RF Energy
This mode provides for RF measurements. The user can configure the SECULIFE ESXTRA for the
desired RF measurement including Pulsed/Continuous waveform measurement, load setting, etc.
Power Load Curves
This mode provides for automated load curve testing of the DUT. Load curves can be configured for
multiple load values and power levels.
MAIN SCREEN