Operation Manual

GMC-I Messtechnik GmbH 51
SECULIFEESXTRA
REM/ARM/CQM
This mode allows the user to test the REM/ARM/CQM function of the DUT. The resistance can be
manually entered, adjusted by a specific resistance, or adjusted by a percent of resistance. This mode
also has the ability to set the CQM load to an open circuit.
Measure RF Leakage
This mode provides for RF Leakage measurements. The user can configure the SECULIFE ESXTRA for
the desired RF Leakage measurement including Pulsed/Continuous waveform measurement, load
setting, etc. All switching for the leakage modes is performed by internal relays.
System Tools
This mode provides for configuration of the SECULIFE ESXTRA. In this mode the user can calibrate the
touchscreen, update the system firmware, and adjust settings such as filter rate and system volume.
System Information
The system information screen is shown by pressing the SECULIFE ESXTRA title bar on the main screen.
This window provides the basic information about the system including software versions and calibration
due date.
To exit the system information screen, simply press anywhere on the screen.