Operation Manual

52 GMC-I Messtechnik GmbH
SECULIFEESXTRA
The autosequence is a programmable procedure for performing testing on a generator. The
autosequence can consist of any combination of user instructions, RF measurements, Load Curves, or
CQM tests. Once an autosequence is created, it can be saved as a secure sequence, which cannot be
modified. The following image shows the main autosequence menu, where the user can load an
autosequence, view previously saved test results, or create new autosequences.
When selecting an autosequence, the user has the option of opening an Autosequence Setup file (*.seq)
or a Secure Autosequence (*.ssq) by selecting the filter type in the File Open dialog box (see page 109).
The Secure Sequence cannot be modified by the user.
The following screen is shown after opening an autosequence setup file.
AUTOSEQUENCES