Operation Manual
GMC-I Messtechnik GmbH 59
SECULIFEESXTRA
For list based loads, the following screen is shown, allowing the user to select specific resistances to be
used for the test.
The load configuration list can be saved to a file or loaded from a previously saved list. The loads are
automatically sorted by value as they are added to the list.
Single Power Level Tab - For the load curve power configuration, the user can set the SECULIFE
ES
XTRA to run the load curve at a single power level or multiple power levels. The following screen shows
the configuration for a single power level.
By pressing on the power setting, the user will be able to enter the desired power level for the load curve
test.