Operation Manual
GMC-I Messtechnik GmbH 63
SECULIFEESXTRA
Step Values Tab - This tab allows the user to configure a series of CQM resistances to be stepped
through. The CQM resistance can be configured to step by a fixed resistance amount or by a fixed
number of steps across a range or resistances. At each step, the DUT CQM state is evaluated. The test
can be configured to stop when either an alarm or normal CQM state occurs.
The Set Tolerance button is used to determine the pass / fail parameters. The CQM resistance will be
stepped until the CQM state is either normal or alarm as programmed in the step. This point is called the
trip resistance. The tolerance configuration allows the user to configure the trip points that result in a pass
or fail status for the test.