Operation Manual
GMC-I Messtechnik GmbH 65
SECULIFEESXTRA
Running the Autosequence:
When an autosequence is started, the user is first prompted to enter information about the DUT. The data
can be entered by pressing on one of the fields and entering the information from the onscreen keyboard,
external keyboard, or barcode scanner.
Instruction Only Steps - These steps will display the instructions that the user is supposed to follow
before proceeding to the next step. Once the instructions have been performed, the status must be
updated to identify if the step passed or failed. Notes can be added by pressing the paperclip icon at the
bottom of the screen.