Operation Manual

GMC-I Messtechnik GmbH 83

SECULIFEESXTRA

Back Arrow - Pressing the back arrow takes the user to the Main Screen.

Hold Key - The Hold key toggles the Hold mode. Measurements are not updated while in the Hold mode.

Leakage Mode - This button allows the user to select which measurement mode is to be used. There are

four leakage measurement modes available.

Leakage 1a - This leakage test, specified by the IEC as Active Electrode to Ground, is for testing the RF

leakage to earth ground of an Isolated Output type CF electrosurgical generator from a single active or

dispersive lead. The test complies with IEC 601.2.2, sec. 19.101b, fig, 104 and sec. 19.102, adopted by

ANSI/AAMI HF18-2001. The purpose of this test is to verify that open circuit RF leakage of the Device

Under Test (DUT) meets or exceeds the IEC specification. The SECULIFE ES

XTRA internally connects

the load to earth ground. An external ground is also provided at the front panel.

NOTE: DO NOT TEST AN EARTH REFERENCED TYPE BF ELECTROSURGICAL GENERATOR WITH

THIS TEST, THE RESULTING MEASUREMENT WILL BE ERRONEOUS.

Leakage 1b - This leakage test, specified by the IEC as Dispersive Electrode to Ground, is for testing the

RF leakage to earth ground of an Isolated Output type CF electrosurgical generator from a single active or